[503] Call Transfer to Outside Line
Description
This programme determines which Classes of Services (COS) are allowed to perform the Call
Transfer to Outside Line function.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Disable
Programming
1.
Enter 503.
Display: Transfer to CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
Features Guide References
Call Transfer
General Programming
( =all COS)
key in step 3. In this case, the display shows
2.6 COS Programming
165