2.6 COS Programming
[504] C all Forwarding to Outside Line
Description
This programme determines which Classes of Services (COS) are allowed to perform the Call
Forwarding to Outside Line function.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS – Disable
Programming
1.
Enter 504.
Display: Call FWD to CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
Features Guide References
Call Forwarding
166
( =all COS)
key in step 3. In this case, the display shows
General Programming