Menu Settings And Operations; Robotic Camera Head Settings Menu - Canon CR-G100 Instruction Manual

4 Configuration

Menu Settings and Operations

 Robotic Camera Head Settings Menu
While the operation panel ([Operation] tab) is displayed, click [
With the menu settings under the [Operation] and [Control] tabs, you can change the operation of the camera head and
connected devices.
Menu item
[Operation] tab
[Homing target axes]
[Home the pan axis],
[Home the tilt axis],
[Home the roll axis],
[Home the zoom axis]
[Pan speed (20 – 12000)]
[Low]
[Medium]
[High]
[Tilt speed (20 – 12000)]
[Low]
[Medium]
[High]
[Roll speed (20 – 12000)]
[Low]
[Medium]
[High]
[Zoom speed (0 – 7)]
[Low]
[Medium]
[High]
[Restore Default Settings]
[Control] tab
[Devices]
[Camera],
[Lens]
[Max speed for manual control]
[Pan (30 – 120)],
[Tilt (30 – 120)]
[Roll (30 – 90)]
] to open the Robotic Camera Head Settings menu.
Setting options and additional information
On (selected), Off
Select the axes that will be reset with a homing operation (A 18).
20 to 12000 (100)
20 to 12000 (1000)
20 to 12000 (10000)
20 to 12000 (100)
20 to 12000 (1000)
20 to 12000 (10000)
100 to 9000 (100)
100 to 9000 (500)
100 to 9000 (5000)
The maximum pan/tilt/roll speed is determined by the [Speed control max
velocity] setting under the [Control] tab.
0 to 7 (0)
0 to 7 (2)
0 to 7 (7)
—
Click this button to reset all the settings in the same tab to their initial
values. The changes are not saved until you click [OK].
List of models
Select the connected main capture camera and lens used.
Select the maximum pan/tilt/roll speed used during manual operation. To
change the setting, remove the checkmark from the [Default] box.
30 to 120 (30)
30 to 90 (30)
26
Menu Settings and Operations