Table of Contents
Advertisement
4 Configuration
Setting the Motion Speed
Set the operation speed for pan, tilt, roll and zoom motion to one of three levels: [High], [Medium] or [Low]. The actual
speeds assigned to each speed level can be changed using the Robotic Camera Head Settings menu (A 26).
Setting the Pan Motion Range
Click [
] or [
] to pan left and right, respectively. The directions are
reversed in underslung mode.
1.
Click [
] to pan left until the desired end of the motion
range and then click [Left Limit] to confirm the motion limit.
2.
Similarly, click [
motion range and then click [Right Limit] to confirm the motion limit.
3.
Click [Save] to save the motion range values.
Setting the Tilt Motion Range
Click [
] or [
] to tilt up and down, respectively. The directions are
reversed in underslung mode.
1.
Click [
] to tilt down until the desired end of the motion
range and then click [Down Limit] to confirm the motion limit.
2.
Similarly, click [
range and then click [Up Limit] to confirm the motion limit.
3.
Click [Save] to save the motion range values.
Setting the Roll Motion Range
Click [
] or [
] to roll counter-clockwise and clockwise, respectively.
The directions are reversed in underslung mode.
1.
Click [
] to roll counter-clockwise until the desired end of
the motion range and then click [CCW Limit] to confirm the
motion limit.
2.
Similarly, click [
to confirm the motion limit.
3.
Click [Save] to save the motion range values.
] to pan right until the desired end of the
] to tilt up until the desired end of the motion
] to roll clockwise until the desired end of the motion range and then click [CW Limit]
Setting the Camera Head's Motion Range
Current pan
position
Current tilt
position
Current roll
position
20
Current pan
motion range
Current tilt
motion range
Current roll
motion range
Advertisement
Table of Contents
Troubleshooting
