Taking And Evaluating Test Pictures - Nokia 500 Service Manual

Hide thumbs Also See for 500:
Table of Contents

Advertisement

RM-750
Camera Module Troubleshooting

Taking and evaluating test pictures

taking a test picture, remember the following:
When
• Avoid bright fluorescent light, 50/60Hz electrical network or high artificial illumination levels
• If the phone is hot, let it rest for a while before taking the picture
• Make sure the optical system is clean
• Use highest possible resolution
• Make sure the light is sufficient (bright office lightning)
• Do not take the picture towards a light source
• Hold the phone as still as possible when taking the picture
• If camera has auto focus: Pictures should be taken both at infinity ~>2m and at macro distance ~10-15 cm
in order to verify auto focus functionality
evaluating a test picture, remember the following:
When
• The center of the picture is sharper than the edges
• The image may be blurred, though it does not show in the viewfinder
• Analyse the picture from your PC monitor, full colour setting is recommended
• If possible, compare with a picture of the same motive taken with a similar Nokia device
• If camera has auto focus: Remember that the white focussing frame which appears when the camera
button is pressed halfway down, must turn green for auto focus lock. If the frame turns red, the camera
is not focussed!
Issue 1
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Page 4 – 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-750

Table of Contents