Huawei OptiX RTN 980 Quick Installation Manual page 21

3
Installing the Service Cables for the Equipment
a
Installing E1 Cables
UFLP
NOTE
For cabinet sharing, the E1 cables need not be connected
to the SLPU. Instead, they are directly connected to the
equipment at the opposite end.
b
Installing Ethernet Cables
NOTE
For cabinet sharing, the Ethernet cables are not
connected to the SLPU. Instead, they are directly
connected to the equipment at the opposite end.
FE0 FE1 FE0 FE1
INSIDE OUTSIDE
FE0 FE1 FE0 FE1
UFLP
INSIDE OUTSIDE
INSIDE
E1 cables for 1xAnea
96/4xDB25 conversion
are used.
1~8
Rubber block
E1
1-16
UFLP FE0
INSIDE
19
OUTSIDE
INSIDE OUTSIDE
Cable outlet bags
are used in
cabinets of Ver. D.
Cable outlet bags
are used in
cabinets of Ver. D.
FE1 FE0 FE1
OUTSIDE
Rubber block
FE1