Huawei OptiX RTN 980 Quick Installation Manual page 13

Remove the baffle plates from both sides
of the base (by removing the plate on the
left side as an example).
b
Moving the Cabinet onto the Base
NOTE
Select a proper method to move the cabinet as required. The crane is here used as an example.
Install the lifting lugs.
Plastic
screw
CAUTION
Store the plastic screws properly.
Move the cabinet onto the base.
CAUTION
Before installing the plastic screws, clean the installation holes to ensure that they are free of metal
shavings.
10
Remove the baffle pieces from the back
of the base.
NOTE
All the three cable holes on the base can be used for
cable layout, depending on the actual requirements.
Tie the ropes.
Lifting lug
Remove the ropes and install the plastic screws.
11
Maximum 90°