Getting Started - FANATEC PORSCHE 911 turbo S WHEEL Manual

6. Getting started

After pressing the power switch it automatically self
calibrates with a full rotation to the right side and back
to the center. Please keep your hands off the wheel
during calibration and do not press any pedals. The
wheel display shows "- - - " and waits in Standby Mode.
Now you can select on of the three separate platform
modes which ensure best functionality on Xbox 360, PC
and Playstation 3.
Please note that if you use the wheel for the fi rst time
you might need to bind the RF dongle to the wheel or
calibrate the shifter (7GS). Please see instructions below
how to do this.
6.1 Select platform mode
Xbox 360 Mode
The Porsche Wheel Turbo S communicates wireless with
the Xbox 360 and does not need any cable or dongle.
1. Power on both devices.
2. After self calibration press and hold Xbox 360 Guide
Button for one second or press and hold Start
Button for one second.
3. The Wheel button illumination shows Xbox 360
symbols. Xbox 360 and PWTS are connected.
If you use the wheel for the fi rst time, the PWTS must
be connected to the Xbox 360 like any other wireless
controller.
Xbox 360
Guide Button
1.) Press Connect Button on your console
ring of light starts blinking
2.) Press and hold Connect Button on wheel about one
second
ring of light on wheel stops blinking and shows the
same illuminated segment
3.) PWTS and console are connected
22
Connect Button
on Xbox 360
Connect Button on wheel