Summary of Contents for FANATEC PORSCHE 911 turbo S WHEEL
Page 3
Manual Porsche 911 Turbo S Wheel (PWTS) Thanks for choosing the Porsche 911 S Turbo Wheel. Before using this product read this manual for important safety and health information. Keep all manuals for future reference. For FAQs and further information please visit www.FANATEC.com/support.
Page 4
INDEX 6. „Getting started“ 1. General 6.1 Select Platform mode 2. Content of package Xbox 360 3. Compatability 4. Description of buttons and accessories 6.2 Tuning 4.1 Buttons 6.3 Calibration 4.2 Pedals Shifter 4.3 Shifters Wheel Center 4.4 RF Dongle 4.5 Cables 6.4 Binding with optional RF dongle 7.
Page 5
Keep photosensitive epileptic seizures may be reduced by all manuals for future reference. For replacement taking the following precautions: manuals, go to www.FANATEC.com/support. • Sit farther from the TV screen. • Use a smaller TV screen.
Page 6
not playing a video game. Symptoms such as these can continuous Force feedback activity is 1 hour. Let be associated with painful and sometimes permanently the wheel cool down for a few minutes before you disabling injuries or disorders of the nerves, muscles, continue.
Page 7
- do not pull on the cord. • If the power cord becomes damaged in any way, stop using it immediately and contact Fanatec Customer Support for a replacement. • Unplug your racing wheel’s power cord during storms or when unused for long periods of...
2. Content of package 3. Compatability Microsoft Xbox 360 • Steering wheel The PWTS can be used with all games which support • USB Cable (Force Feedback) racing wheels. Only new games (eg. Forza Motorsport 3) will use extended features like 900° •...
4. Description of buttons and accessories 4.1 Buttons Buttons on wheel (Xbox 360 mode) LSB RSB Back Button Start Button IMPORTANT: This button naming will be used to explain all button combinations!
Page 14
4.3 Shifters 4.4 RF Dongle two LEDs 6-speed gear stick plus reverse PS/2 Slot Sequential PS/2 Slot Button on backside white LED indication of boot mode for programming the dongle red LED connection with wheel established...
Page 15
4.5 Cables Power supply (DE) Power supply (US) UK adapter (EU version only) USB cable Connection base to pedals 110V-220V Power supply for wheel Connection base to gear stick...
5. Installation To build up some counterforce use a fl at underground and place the wheel vertical on the tubes. Then push 5.1 Installation of shifters the wheel down with soft pressure. Make sure that the tube fi xation screws are lose. Use a coin and not a screwdriver.
Page 17
Connect the gear stick connection cable with the base and the gear stick. Put the wheel on the side to build up some counterforce and press the gear stick on the tubes from above until you see the metal tubes coming out on the other side of the gear stick channels.
Page 18
Pull out the table clamp a little bit (5 cm). Tighten the table clamp screw. Fasten the quick release clamps. Mount the wheel to the table and then push in the table clamp as much as possible. Please note that the quick release clamps must be unfastened.
Page 19
5.3 Simulator installation 5.4 Installation of pedals If you prefer a permanent installation on a table or In combination with the PWTS you can use the Porsche simulator you can fi x the wheel with 4 screws to any fl at Wheel Standard Pedals, the ClubSport Pedals, the G25 surface.
Page 20
If you use the ClubSport Pedals you can also connect 5.5 Connection of Xbox 360 Headset them directly to the PC as a separate USB controller. Turn down the volume by rotating the volume control all the way to the left. Insert the 2.5 mm headset connector into the female connector on the Left side of your PWTS.
Page 21
5.6 Electrical connection (Wheel power supply) Please plug-in the power supply to the right side of the base. Power supply Power switch...
6. Getting started Connect Button After pressing the power switch it automatically self on Xbox 360 calibrates with a full rotation to the right side and back to the center. Please keep your hands off the wheel during calibration and do not press any pedals. The wheel display shows “- - - “...
Page 23
Alternatively you can plug in the (optional) Windows 7 (32-Bit/64-Bit). RF dongle to your PlayStation 3. In case the wheel Please check www.FANATEC.com/support for the does not connect to the RF dongle you might need latest updates on the driver.
Page 24
Connect Button To navigate in the menu Back Button 6.2 Tuning With the TUNING feature you can fi ne tune the wheel settings independent from the game or platform even during gameplay directly on the wheel. You can adjust the strength of the Force Feedback and vibration motors as well as setting the best sensitivity for your favourite D-Pad game.
Page 25
To navigate in the menu: 210 / 360 / 540 / OFF (default) Press the Tuning Button. If the setting is „OFF“ the sensitivity of the The currently active set-up will wheel will be controlled by the Game In case appear, indicated by S_1 to S_5.
Page 26
ABS Vibration 6.3 Calibration 0-100 Shifter This feature simulates ABS vibration by If the 6-speed gear stick (7GS) is not working activating the vibration motors in the wheel properly it might require new calibration. and on the brake pedal of the ClubSport Please go through the following steps: Pedals (optional).
Page 27
The display will now change to G_4 Bring the 7GS into 4 gear Press the „Start Button“ The display will now change to G_5 Bring the 7GS into 5 gear LSB + RSB Button Press the „Start Button“ The display will now change to G_6 Bring the 7GS into 6 gear Press the „Start Button“...
Page 28
6.4 Binding with (optional) RF dongle After a fi rmware update of the wheel or dongle, if the RF dongle was purchased separately or if you exchange a component it might be required to bind the wheel to the RF dongle. Connect RF Dongle to PC or PS3 Power on PWTS and activate PC mode right D-Pad Button...
9. Troubleshooting Choose platform mode Power on the wheel and wait until self calibration has The Porsche 911 Turbo S Wheel must not be opened fi nished. Display shows “- - - “. or modifi ed. Endor® AG expressly prohibits analysis...
Page 30
the SEN (Sensitivity) in the Tuning menu. must shine permanently. In case it does not, try to Clutch or 6-speed gear shift is not working at all renew the binding (further info in the section 6.4). • Please make sure that your game supports this •...
United States and/or other countries. driver at www.FANATEC.com/support. 13. Warranty 10. Technical Support / FAQ Please check the FAQ database at www.FANATEC. www.FANATEC.com/support com whether your problem can be already solved there. Normally, the warranty period is two years. However, this may differ depending on the respective state.
Page 32
fi nal customer purchased the product, and is exclusively can be agreed upon in accordance with the respective limited to the rights as of 2), as far as this does not limit national laws or jurisdiction. any further legal warranty claims on the basis of various national laws.
Need help?
Do you have a question about the PORSCHE 911 turbo S WHEEL and is the answer not in the manual?
Questions and answers