FANATEC PODIUM Wheel Rim NASCAR Quick Manual

Wheel Rim NASCAR
®
Quick Guide
EN
The NASCAR identifications and logos are trademarks, copyrighted designs, and other
forms of intellectual property of the National Association for Stock Car Auto Racing, Inc.
Fanatec ® is a registered trademark of Endor AG
Designed and developed by Endor AG in Germany
www.fanatec.com
Made in China
PACKAGE CONTENTS
A
D
B
C
E F
● NASCAR Wheel Rim (A)
®
● NASCAR Soft Hub Cover with preinstalled Velcro
®
● Adapter plate with preinstalled Velcro (C)
● M etal Hub Cover (D)
● 6 x M5x16mm hexagon button head cap bolt (E)
● 6 x M5x16mm hexagon countersunk bolt (F)
Page 1
1.
2.
3.
NOTE: The position and mounting of the Button Clusters on your Fanatec Hub
depends on your personal preference. Please read the Manual of your
1.
(B) 2.
ATTACHING THE WHEEL RIM
WITH SOFT HUB COVER
● Align the Velcro adapter Plate (C) on the FANATEC
Hub.
● Place the Wheel Rim (A) on top and insert the 6
countersunk bolts (F) into the mounting holes and tighten
them equally.
NOTE: Use the bolts included with a max. torque of
2 Nm on your Wheel Rim.
● Align the Soft Hub Cover (B) with the Velcro on the
adapter plate (C) and press firmly to connect the two
parts.
Hub for Xbox One or Podium Hub for more information.
DETACHING THE WHEEL RIM
WITH SOFT HUB COVER
● To detach the Soft Hub Cover (B), twist the Soft Hub
Cover slightly whilst pulling it away from the adapter
plate (C).
● Loosen the bolts (F) and remove the Wheel Rim and
the adapter plate(C) from your Fanatec Hub.
Page 2
®
Universal