Porsche 911 Turbo S Wheel Developer Quick Guide This simple guide will show you the basic functions, modes and features of the Porsche 911 Turbo S Wheel (PWTS) for Xbox 360, Windows PC and Playstation 3. Table of contents: 1.1) Getting Started 1.2) Select platform mode...
1.1 Getting Started Before you power on the Porsche 911 Turbo S Wheel (PWTS) please connect all accessories (6+1 shifter, sequential shifter, standard pedals, Clubsport Pedals, RF Dongle) you want to use. Please always power off the wheel first before you change the gaming platform.
2.1 Buttons (general / PC) In standby mode and PC we’ll use the this button naming: In PS3 and Xbox 360 mode we’ll use the standard button naming of the console controller.
Bind RF Dongle (PS3/PC) After a firmware update it is required to make a new binding between RF Dongle and PWTS. Procedure: -> Connect RF Dongle to PC or PS3 -> Power on PWTS and activate PC mode (press back button one second) ->...
Install driver before connection a Porsche Wheel to the PC You can use the driver of the 911 Turbo or 911 GT3RS which can be downloaded here: http://www.fanatec.de/html/index.php?id=3114&lang=en After activating PC Mode (hold BAB 1 second) your windows operating system will detect the PWTS correctly.
Page 7
6+1 Shifter: If the 6+1 gear stick (7GS) is not working properly it might require new calibration. Please go through the following steps: Connect the power supply to the base Enter any platform mode (PC/PS3/Xbox360) Press „start button“ (STB) + „tuning button“ (TUB) at the same time The LED display will show G_n ...
7 Accessories The standard version (not “pure”) of the Porsche 911 Turbo S Wheel will be delivered with these connectable accessories: RF Dongle for Playstation 3 and PC (wireless connection) 6+1 gear shifter Sequential gear shifter Standard (cable) pedals Optional: Clubsport Pedals (The CSP will be part of the “Porsche 911...
Need help?
Do you have a question about the Porsche 911 Turbo S Wheel and is the answer not in the manual?
Questions and answers