Country-specific approvals
Safety
If the device has one of the following markings, the corresponding approval has been
obtained.
Marking
ATEX (explosion protection directive)
Risk of explosion in hazardous areas
When using SIMATIC NET/SIMATIC Ident products in Zone 2 hazardous areas, it is essential
that you pay attention to the associated special conditions in the document:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document here:
• On the data medium that ships with some products:
– Product CD / product DVD
– SIMATIC NET Manual Collection
• On the Web pages of Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/78381013)
SIMATIC RF120C
Operating Instructions, 02/2021, C79000-G8976-C328-03
WARNING
Description
Underwriters Laboratories Inc. in accordance with
•
UL 508 (Industrial Control Equipment)
The product meets the requirements of the standards according to
AS/NZS 61000.6.4:2007 (Class A).
Additional information is available in the Operating Instructions "S7-
1200 Programmable Controller".
Russia, Belarus and Kazakhstan
South Korea (KCC)
Korea Communications Commission
Certificate of Broadcasting and Communication Equipments
Republic of Korea
KCC-REM-S49-SIMATICRF
Appendix
A.1 Certificates & approvals
39