Before Operation; Precautions For Operation; Ensure Safety When Operating On Road Shoulders; Avoid Overloading - Hitachi ZW 180-6 Operator's Manual

Wheel loader
Hide thumbs Also See for ZW 180-6:
Table of Contents

Advertisement

Before Operation

d
WARNING:
 Be sure to install only authorized buckets and
other work tools.
 Never modify or increase the capacity of
the bucket or other work tools without first
receiving authorization. Do not overload
the machine by installing additional
counterweights. This may result in personal
injury and/or machine trouble.

Precautions for Operation

d
WARNING:
 Confirm work site safety before starting work.
 Use the machine equipped with FOPS and ROPS
if the machine is to be operated in the areas
where the possibility of rollover or falling stones
exists.
 If operation on excessively soft ground is
required, operate the machine only after
stabilizing the soil.
 Be sure to wear close fitting clothing and safety
equipment appropriate for the job, such as a
hardhat, etc. when operating the machine.
 Clear all persons and obstacles away from the area of
operation and machine movement. Always be aware
of all hazards within the area around the machine
while operating.
Ensure Safety When Operating on Road
Shoulders
d
CAUTION: Stabilize the soil before operating the
machine on soft road shoulders.
OPERATING THE MACHINE

Avoid Overloading

d
WARNING:
 Do not penetrate the bucket into piles of soil
 Avoid excavating or scooping loads when the
IMPORTANT: Avoid machine abuse by allowing the
bucket or attachment to receive loads at only one
side. Damage to the machine may result.
Avoid Rapid Steering Changes and/or
Sudden Braking
d
WARNING: Always maintain a flat work site
surface. Avoid rapid steering changes and sudden
braking while raising the lift arm with the bucket
loaded to prevent the machine from turning over.
Avoid Operation with Loads on Only One
Side
d
WARNING: Avoid machine abuse by allowing the
bucket to receive loads at only one side. Machine
rollover or deformation of the lift arm may result.
5-14
and/or gravel at fast travel speed.
machine is articulated, which could possibly
cause the machine to turn over.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents