Table of Contents
Advertisement
IMPORTANT: This machine is equipped with a
turbocharged engine. Therefore if the engine is
stopped without first cooling down at low RPM's,
the lubricant on the turbocharger bearing and seal
surfaces may be dissipated due to the intense heat
present inside turbocharger, possibly damaging
the turbocharger.
6. Run the engine at slow idle speed for 5 minutes to
cool the engine.
f
NOTE: Do not idle for excessively long periods.
Observe local and federal engine idling regulations.
IMPORTANT: Do not leave the machine with key
switch (9) in ACC position. This may discharge the
batteries.
Be sure to turn key switch to OFF position before
leaving the machine.
7. Turn key switch (9) to OFF position to stop the
engine. Remove the key from the switch. Place
neutral lever lock (4) to the lock ( ) position. Turn
OFF the light switch.
8. Before leaving the machine, close and lock all the
windows, cab doors, and covers.
MOVING THE MACHINE
4-17
4
9
9
MNEC-01-036
M4GB-01-089
Advertisement
Table of Contents
Troubleshooting
