Product Description; Magne 3; Magne 4 - ABB Magne 3 Product Manual

3

Product description

Magne is an electromagnetic process lock that locks a door or a hatch and is intended for
applications that are sensitive to unintentional or unnecessary interruptions.
Magne has a holding force of up to 1500 N.
Magne uses a M12 connector for power and connection with other safety devices.
There are several different Magne models. All of them must be used with an anchor plate.
Magne 4 models also require an Eva actuator.
Magne can be installed on a door, preferably using an ABB mounting kit, available for sliding
doors or hinged (conventional) doors. See chapter 'Mounting kits'.
3.1

Magne 3

Magne 3 keeps a door locked. If used in safety applications, Magne 3 needs to be
complemented with an external interlocking device.
3.2

Magne 4

Magne 4 keeps a door locked with integrated interlocking.
Magne 4 has an integrated Adam sensor which provides an interlocking function together
with an Eva actuator.
The Eva actuator is ordered and installed separately. Eva is available with a general or a
unique code.
Magne 4 is available with integrated Adam DYN (DYNlink signal) or Adam OSSD (OSSD signal)
using M12 5-pole or M12 8-pole connector.
2TLC172315M0201 Rev.M3
7