Serial Connections; Magne 4 Dyn-Info And Pluto - ABB Magne 3 Product Manual

6

Serial connections

To install the safety circuit in a correct way, follow relevant examples of serial connections
below.
Magne 4 can be connected in series. It is not possible to combine OSSD and DYNlink signals
in a safety circuit.
If only one OSSD device is used, or if Magne 4 OSSD is the first unit in the series, +24 VDC
must be connected to OSSD1 In and OSSD2 In. Otherwise the OSSD output signals will not be
generated from Magne.
6.1

Magne 4 DYN-Info and Pluto

Magne 4 DYN-Info and Pluto (Drawing ID: 2TLC010021T0005)
2TLC172315M0201 Rev.M3
2 2