Canon SPEEDLITE EL-1 Advanced User's Manual page 98

E-TTL balance
You can set the finish (taste) of the flash photo according to your preference. Depending
on the settings, you can change the flash ratio between the ambient light and flash light.
E-TTL II meter.
When this is set to [Eval (FacePrty)], the flash is adjusted to suit the subject. The
continuous shooting speed during high-speed continuous shooting is lower than
[Evaluative] or [Average]. When [Evaluative] is set, flash control is performed with
priority given to firing during continuous shooting. If [Average] is set, the flash exposure
will be averaged for the entire scene metered. Flash exposure compensation may be
necessary depending on the scene.
Contin flash ctrl
When this is set to [E-TTL each shot], the flash is adjusted for every shot. When this is
set to [E-TTL 1st shot], the flash is adjusted only once before continuous shooting. The
second and subsequent shots will also be taken with the flash output of the first shot.
Effective when you want to prioritize the continuous shooting speed without changing
the composition.
Flash sync. speed in Av mode
You can set the flash synchronization speed when shooting in the <
priority AE mode with Speedlite.
Flash mode
You can select the flash mode from [E-TTL II flash metering], [Manual flash], [MULTI
flash (stroboscopic)], [Auto external flash metering], and [Manual external flash
metering] or [Continuous shooting priority mode] to suit your desired flash
photography.
Wireless functions
You can set radio transmission wireless flash shooting and optical transmission wireless
flash shooting. For details, refer to
"Optical Transmission Wireless Flash
Flash zoom (flash coverage)
You can set the Speedlite flash coverage. When [Auto] is selected, the flash coverage
is set automatically according to the focal length of the shooting lens and the image
sensor size of the camera (
"Radio Transmission Wireless Flash
Shooting".
).
98
> aperture-
Shooting" and