Optical Transmission Wireless Flash Shooting
This chapter describes how to use strobe shooting using the optical transmission wireless
sender / receiver function.
See the system map (
shooting.
Caution
When the camera's shooting mode is set to a fully automatic mode or a Basic Zone
mode, the operations in this chapter are not available. Set the camera's shooting
mode to <
zone).
Note
EL-1 is used as the sender unit and receiver unit in the descriptions.
The EL-1 attached to the camera is called a "sender unit" while the EL-1 controlled
wirelessly is called a "receiver unit".
•
Optical Transmission Wireless Flash Shooting
•
Optical Transmission Wireless Settings
•
Automatic Flash Photography with 1 Flash Receiver
•
Automatic Flash Photography with Receivers divided into 2 Groups
•
Automatic Flash Photography with Receivers divided into 3 Groups
•
Wireless Multiple Flash Shooting with a set Flash Ratio
•
Manual Flash / Multiple Flash set in the Receiver Unit
) for the accessories required for optical transmission wireless flash
> <
> <
> <
> <
> <bulb (
159
)> (Advanced shooting