Remote Release From A Receiver Unit - Canon SPEEDLITE EL-1 Advanced User's Manual

Remote Release from a Receiver Unit

When using an EOS DIGITAL camera released in or after 2012, you can perform remote
release (remote control shooting) from an EL-1 set as a receiver unit during radio
transmission wireless shooting.
1.
Push the joystick vertically.
2.
Take the picture.
Caution
Remote release is not possible from a receiver unit in cameras released up to 2011
or EOS REBEL T100/4000D/3000D, EOS REBEL T7/1500D/2000D,
EOS REBEL T6/1300D or EOS REBEL T5/1200D.
Shooting is not possible when autofocus fails. It is recommended that you set the
focus mode switch of the lens to <
release.
Press the joystick up, down, left, or right, or turn <
< >, then press the joystick vertically.
A release signal is sent from the receiver unit to the sender unit, and
the picture is taken.
>, manually focus on the subject, then
152
> and select