Canon SPEEDLITE EL-1 Advanced User's Manual page 222

The picture periphery looks dark.
Set the flash coverage to <
When manually setting the flash coverage, set a flash coverage wider than the shooting
angle of view (
Make sure C.Fn-21-1 is not set (
The picture is very blurred.
When the shooting mode is set to the <
is dark, slow sync is enabled automatically (the shutter speed becomes slower). Use a
tripod, or set the shooting mode to the <
Note that you can also set the sync speed in [Flash sync. speed in Av mode] (
The flash coverage is not set automatically
Set the flash coverage to <
Insert the mounting foot into the camera's hot shoe all the way, slide the lock lever to the
right, and secure the Speedlite to the camera (
The flash coverage cannot be set manually.
Remove the bounce adapter (
Retract the wide panel (
Functions cannot be set.
Set the camera's shooting mode to <
(Advanced Shooting Zone).
Set the Speedlite's power switch to <
Modeling lamp does not light up.
Rest the unit for 30 minutes if the modeling lamp goes off. If the problem persists,
contact your nearest Canon Service Center.
> (automatic setting) (
).
).
> (automatic setting) (
).
).
).
> aperture-priority AE mode and the scene
> program AE or fully automatic mode (
).
).
> < > < > <
> instead of <
222
).
> < > <bulb (
> ( ).
).
)>