Download Print this page

Maintenance And Inspection; Maintenance And Inspection Interval - Mitsubishi Electric CR800 Series Instruction Manual

Industrial robot, controller setup, basic operation, and maintenance

Hide thumbs Also See for CR800 Series:

Table of Contents

5 Maintenance and Inspection

The maintenance and inspection procedures to be carried out to use the robot for a long time without trouble are

described in this chapter. The types and replacement methods of consumable parts are also explained.

Maintenance and inspection are divided into the inspections carried out daily, and the periodic inspections carry

out at set intervals. Always carry these out to prevent unforeseen trouble, to maintain the product for a long time,

and to secure safety.

(1) Inspection schedule

0 Hr

500 Hr

1000 Hr

1500 Hr

2000 Hr

Operating time

For one shift

8 Hr/day x 20 days/month x 12 months = approx. 1800 Hr

10 Hr/day x 20 days/month x 12 months = approx. 2400 Hr

For two shifts

15 Hr/day x 20 days/month x 12 months = approx. 3600 Hr

[Caution] According to the schedule on the above, when using the double shift, you should

Fig. 5-1 ： Inspection schedule

Monthly inspection

make the inspections at half the regular intervals.

5Maintenance and Inspection

Maintenance and inspection interval 5-73

Table of Contents

Show Quick Links

Table of Contents

Cr800-d Cr800-r Cr800-q