Toro ProPass 200 Installation Instructions Manual page 14

The Toro Company, 8111 Lyndale Avenue South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
44713 315000001 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
David Klis
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
December 18, 2014
Declaration of Incorporation
Product Description
Hydraulic Power Pack
Invoice Description
PROPASS HYD POWER
PACK
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Belgium
Tel. +32 16 386 659
General Description
Hydraulic Power Pack
Directive
2006/42/EC
2004/108/EC