Sony DVS-7200A Maintenance Manual page 49

24. LE-147 or 150 Board (BKDS-7025/7026)
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) Remove the KY-319A or 332 board. (Refer to "13. KY-319A, 319B or 332 Board" in this section.)
(4) Remove the screws securing the LE-147 or 150 board.
For LE-147 Board : 3 pcs
For LE-150 Board : 2 pcs
(5) Disconnect the following connector on the KY-319A or 332 board and remove the LE-147 or 150
board.
For LE-147 Board : Either CN5 or CN6 on the KY-319A board, or CN6 on the KY-332 board
For LE-150 Board : CN7 on the KY-319A board
P2.6 x 5
LE-150 board
CN7
KY-319A board
(6) Install the LE-147 or 150 board in the reverse order of the procedures (1) through (5).
DVS-7200AE MMP1
P2.6 x 5
P2.6 x 5
CN5
LE-147 boards
P2.6 x 5
P2.6 x 5
P2.6 x 5
CN6
1-2. Control Panel
1-2-5. Installation and Removal of Boards
1-41