Sony DVS-7200A Maintenance Manual page 25

2. CN-1150 Board (BKDS-7015)
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) Remove the six screws and the SW cover.
(4) Remove the four screws and disconnect the two connectors (CN2 and CN20), and then remove the
SW bracket.
(5) Disconnect the 16 connectors (CN3 through CN18).
(6) Remove the eight screws and the CN-1150 board.
PWH3 x 5
PWH3 x 5
SW bracket
Harness clamp
PWH3 x 5
CN-1150 board
CN2
(7) Install the CN-1150 board in the reverse order of the procedures (1) through (6).
DVS-7200AE MMP1
PWH3 x 5
CN3
CN5
CN4
CN6
CN7
CN8
CN9
CN10
PWH3 x 5
SW cover
PWH3 x 5
CN14
CN12
CN11
CN13
PWH3 x 5
CN15
CN16
CN17
CN18
CN20
1-2. Control Panel
1-2-5. Installation and Removal of Boards
1-17