M+Rj71C24_Execommonprotocol; Overview; Labels - Mitsubishi Electric MELSEC iQ-R Series Manual

2.10

M+RJ71C24_ExeCommonProtocol

Overview

Executes the protocol registered with GX Works3.
(1)
B: i_bEN
(2)
DUT: i_stModule
(3) UW: i_ uCh
(4)
UW: i_ uNumberOfExecutions
(5)
UW: i_ uExeProtocolNo

Labels

Input label
No. Label
(1) i_bEN
(2) i_stModule
(3) i_uCh
(4) i_uNumberOfExecutions
(5) i_uExeProtocolNo
2 SERIAL COMMUNICATION MODULE FB
28
2.10 M+RJ71C24_ExeCommonProtocol
M+RJ71C24_ExeCommonProtocol
o_bENO: B
o_bOK: B
o_bErr: B
o_uErrId: UW
o_ u NumberOfExecutions: UW
o_ uMatchPacketNo: UW
Label name Data type
Execution Bit
command
Module label Structures
Communication Word [Unsigned]/Bit
channel String [16-bit]
Number of Word [Unsigned]/Bit
continuous String [16-bit]
protocol
executions
Execution Word [Unsigned]/Bit
protocol number String [16-bit] (0..7)
specification
(6)
(7)
(8)
(9)
(10)
(11)
Range Description
ON, OFF ON: The FB is activated.
OFF: The FB is not activated.
 Specify the module to execute this FB.
Specify the module label of relevant modules.
(example: C24_1)
1, 2 Set the channel to communicate with the external
device.
• 1: Channel 1 (CH1 side)
• 2: Channel 2 (CH2 side)
1 to 8 Set the number of continuous executions of the protocol.
1 to 128, 201 to Set the protocol number or the special protocol number
207 to be executed. Protocols are executed in the specified
order of the execution protocol numbers.
+0
+7
Specify the device or label in which the protocol number
to be executed is stored. (Constants cannot be
specified.)
When it is specified using the label, use "ARRAY" for the
data type.
Execution protocol
number specification 1
Execution protocol
number specification 8