M+Rj71C24_Putuserframe; Overview; Labels - Mitsubishi Electric MELSEC iQ-R Series Manual

2.8

M+RJ71C24_PutUserFrame

Overview

Registers and deletes user frames according to the setting value of the request type.
M+RJ71C24_Put UserFrame
(1)
B: i_bEN
(2)
DUT: i_stModule
(3)
UW : i_ uRequestType
(4)
UW : i_ uFrameNo
(5)
UW : i_ uFrameDataLength
(6)
UW : i_ uFrameData

Labels

Input label
No. Label
(1) i_bEN
(2) i_stModule
■Request type = 1: When the user frame is registered
No. Label
(3) i_uRequestType
(4) i_uFrameNo
(5) i_uFrameDataLength
(6) i_uFrameData
■Request type = 3: When the user frame is deleted
No. Label
(3) i_uRequestType
(4) i_uFrameNo
(5) i_uFrameDataLength
(6) i_uFrameData
2 SERIAL COMMUNICATION MODULE FB
24
2.8 M+RJ71C24_PutUserFrame
o_bENO: B
o_bOK: B
o_bErr: B
o_ uErrId: UW
Label name Data type
Execution Bit
command
Module label Structures
Label name Data type
Request type Word [Unsigned]/Bit
String [16-bit]
Registration frame Word [Unsigned]/Bit
No. String [16-bit]
Number of Word [Unsigned]/Bit
registration bytes String [16-bit]
Registration frame Word [Unsigned]/Bit
storage device String [16-bit]
(0..39)
Label name Data type
Request type Word [Unsigned]/Bit
String [16-bit]
Registration frame Word [Unsigned]/Bit
No. String [16-bit]
Number of Word [Unsigned]/Bit
registration bytes String [16-bit]
Registration frame Word [Unsigned]/Bit
storage device String [16-bit]
(0..39)
(7)
(8)
(9)
(10)
Range Description
ON, OFF ON: The FB is activated.
OFF: The FB is not activated.
 Specify the module to execute this FB.
Specify the module label of relevant modules.
(example: C24_1)
Range Description
1 When the initial setting is performed using this FB, set
Request type = 1.
1000 to 1199 Set the user frame number to be registered.
1 to 80 Set the number of bytes for the user frame to be
registered.
Shown on the right Set the data to be registered.
When it is specified using the label, use "ARRAY" for the
data type.
Range Description
3 When the initial setting is performed using this FB, set
Request type = 3.
1000 to 1199 Set the user frame number to be registered.
1 to 80 Specify 1 to 80 as a dummy when the frame is deleted.
Shown on the right Specify the same value at the registration.
When it is specified using the label, use "ARRAY" for the
data type.