Feed Roller Controls - Vermeer BC1000XL Operator's Manual

F R C
EED OLLER ONTROLS
(1) Upper Feed Control Bar
Rear position . . . . . . . . . . . . . . . . . . . . . feed roller emergency STOP
Second position from rear. . . . . . . . . . . . . . . . feed roller FORWARD
Top/third position from rear . . . . . . . . . . . . . . . . . . feed roller STOP
Forward position . . . . . . . . . . . . . . . . . . . . . . . feed roller REVERSE
NOTE: Upper Feed Control Bar is spring-returned from REVERSE to STOP
position and must be held to operate feed roller in REVERSE.
NOTE: Feed roller will not move unless:
• cutter drum is engaged
• engine speed is at high RPM
• Lower Feed Stop Bar is reset (rear amber warning light not blinking)
• Upper Feed Control Bar is in forward or reverse feeding position, or Hold-
to-Run Button is pressed.
NOTE: SmartFeed control is always ON, and is activated automatically.
NOTE: Feed roller will move in REVERSE at any engine speed and when light blinks.
BC1000XL Brush Chipper 3_06 3_05 3_01
BC1000XL
1
BC1000XL EU
1
Controls 20-5