Grip Roller / Pinch Roller - Mitsubishi Electric CP-D70DW Service Manual

18. Grip roller / pinch roller

Step No.
1 Procedure of 4-1 (Slide mecha ASSY)
2 Procedure of 13-3 (Mecha cover R)
3 Procedure of 15-2 (Mecha cover L)
2 Procedure of 17-2 to 17-3 (Front door ASSY open. / S1 sen holder)
4 Paper holder L
5 Remove the cover holder L by moving it in the direction shown by the arrow.
6 P exit gear ASSY S
7 Paper holder R
8 Remove the cover holder R by moving it in the direction shown by the arrow.
9 M1 tension spring
10 S15m belt
11 Pinch spring
12 Grip roller
13 Procedure of 16-2 (Bracket ASSY(M4))
14 Procedure of 14-3 (It enc sen PCB ASSY)
15 Pinch gear cam L [Note 1]
16 Pinch gear cam R [Note 1]
17 Pinch roller [Note 2]
[Note 1] To attach the pinch gear cam L or pinch gear cam R, align the round hole of the pinch gear cam L or
pinch gear cam R with that of the platen gear cam L or platen gear cam R.
[Note 2] When you remove the pinch roller, move the right edge of the pinch roller to the hole of the grip roller
and push out to the right, then remove the pinch roller from the left side.
Parts name Address
Number of parts
to be removed
B-1 6 (1pc.)
C-3 6 (1pc.)
C-2 6 (1pc.)
C-2 - - - - -
C-3 - - - - -
C-1 - - - - -
A-2 33 (2pcs.)
A-1 33 (1pc.)
B-3 33 (1pc.)
A-3 34 (2pcs.)
- 19 -
Connectors or parts
to be removed
127
126
- - - - -
- - - - -
- - - - -
94 / 100 / 101 / 103 / 104 / 130
- - - - -
- - - - -
44 / 100
Platen gear cam L
Round hole of
the platen gear cam L
Round hole of
the pinch gear cam L
Pinch gear cam L