Appendix; Appendix 1 Emc And Low Voltage Directives; Appendix 1.1 Requirements For Compliance With The Emc Directive - Mitsubishi Electric MELSEC-Q Series User Manual

APPENDIX

Appendix 1
Compliance with the EMC Directive, which is one of the EU directives, has been mandatory for the products sold within
EU member states since 1996 as well as compliance with the Low Voltage Directive since 1997.
To prove the compliance with these Directives, manufacturers must issue an EC Declaration of Conformity and the
products must bear a CE marking.
(1) Sales representative in EU member states
The authorized representative in EU member states will be:
Company name: MITSUBISHI ELECTRIC EUROPE B.V.
Address: Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
Appendix 1.1
The EMC Directive sets two requirements for compliance: emission (conducted and radiated electromagnetic energy
emitted by a product) and immunity (the ability of a product to function without being influenced by externally
generated electromagnetic energy), and all applicable products are required to satisfy these requirements. This
section summarizes the precautions for machinery constructed with this product to comply with the EMC Directive.
These precautions are based on the requirements of the EMC Directive and the harmonized standards. However, they
do not guarantee that the entire machinery constructed according to the descriptions complies with the EMC Directive.
The manufacturer of the machinery must determine the testing method for compliance and declare conformity to the
EMC Directive.
EMC and Low Voltage Directives
Requirements for compliance with the EMC
Directive
APPENDICES APPENDIX
69
A