Chapter 3 Operation Mode; Qj51Aw12D2; Transmission Speed Setting - Mitsubishi Electric MELSEC-Q Series User Manual

CHAPTER 3
Connect the slave module for the AnyWire DB A20.
3.1

QJ51AW12D2

3.1.1

Transmission speed setting

Select the settings such as the transmission distance using the operation mode selector (4-gang DIP switch).
• SW-1, 2  Set the transmission distance using a combination of ON/OFF for 1 and 2.
• SW-3  System reserve (Set the switch to OFF. Using the module with this switch set to ON may cause
malfunction.)
• SW-4  System reserve (Set the switch to OFF. Using the module with this switch set to ON may cause
malfunction.)
OFF
OFF
ON
ON
AnyWire AnyWire
26
OPERATION MODE
Switch
1 2
OFF
ON
OFF
ON
Operation mode selector
To enable the operation mode selector, switch it to the right.
*The default switch setting is OFF.
Specifications
2kHz 3km
7.8kHz 1km
31.3kHz 200m
125kHz 50m