Bosch Rexroth ID 40 Manual page 19

The following table provides an overview:
Table 4: Overview of ID 40/SLK read/write head displays
Display range Displaying
Area 2 System activity
Area 2 Fieldbus activity
Area 1 Actual link state
Area 1 Error state with error
number
Area 1 and Fieldbus node number Only shown during boot
area 2
Area 1 and Fatal error,
area 2 flashing system stopped
Remark Example
The SLK operating system
is active when the bar in
the fourth display seg-
ment rotates.
The bottom half of the
display segment contains
symbols indicating the
status of the fieldbus.
Their appearance and
meaning depend on the
fieldbus. See Chapters 8
to 10 for more details.
See Chapter 2.2.1
"SLK operating states"
See Chapter 12.1
"Troubleshooting guide"
for meaning
up and consists of the
fieldbus code letter and
three-digit node number
See Chapter 12.1.2
"Fatal system errors" for
meaning
3 842 530 344/2014-05, MIT: ID 40, Bosch Rexroth AG
PROOF COPy 1 | 20.05.2014 | FOR INTERNAL USE ONLy
Introduction 19/176