Feedback Signal To Pay System; Payment System Lock - Miele PWM 307 Operating And Installation Instructions

Supervisor level

Feedback signal to pay system

Setting the feedback signal for the
coin box.
- Factory default: Off
- End of programme
The feedback signal is sent at the
end of the programme.
- Release of the start button
The feedback signal is sent when the
start button is released.
- Start and programme end
The feedback signal is sent at the
start and end of the programme.
- Programme running
The feedback signal is sent con-
stantly between the start and end of
the programme.
80

Payment system lock

To avoid tampering, a programme lock
can be set up in programme control. If
the lock is applied, the programme is
interrupted and payment credit is lost
as soon as the door is opened.
The time for the lock to be applied can
be adjusted to enable laundry to be ad-
ded.
- Off
- As soon as the programme starts
- 1 minute after the start of the pro-
gramme
- 2 minutes after the start of the pro-
gramme
- 3 minutes after the start of the pro-
gramme (factory default)
- 4 minutes after the start of the pro-
gramme
- 5 minutes after the start of the pro-
gramme