Feedback Signal To Pay System; Clear Paid Signal; Payment System Lock; Foc Programmes - Miele PWM 507 Hygiene Operating And Installation Instructions

Supervisor level

Feedback signal to pay system

Setting the feedback signal for the
payment system.
– Factory setting: Off
– Programme end
The feedback signal is sent at the
end of the programme.
– Release of the start button
The feedback signal is sent when the
start button is released.
– Start and end of programme
The feedback signal is sent at the
start and end of the programme.
– Running programme
The feedback signal is sent
continuously from the start until the
end of the programme.

Clear paid signal

The "Paid" signal in payment system
mode can be applied until the end of
the programme or discarded if the
programme has not been started after
5 minutes.
Factory setting: Off
78

Payment system lock

To avoid tampering, a programme lock
can be set up in programme
operation. If the lock is applied, the
programme is interrupted and
payment credit is lost as soon as the
door is opened.
To offer the possibility to add laundry,
the time when the lock activates can be
adjusted.
– Off
– As soon as the programme starts
– 1 minute after the start of the
programme
– 2 minutes after the start of the
programme
– 3 minutes after the start of the
programme (factory setting)
– 4 minutes after the start of the
programme
– 5 minutes after the start of the
programme

FOC programmes

In payment system mode, you can
decide whether the
programme can be used for free.
Factory setting: Off
Drain/Spin