Miele PWM 307 Operating And Installation Instructions page 22

Before using for the first time
Select pre-wash water

Cold
Pre-wash
water
 Touch the
cold
machine is only connected to a cold
water supply, or touch
washing machine is connected to
cold and hot water.
The display will change to the next set-
ting.
Select main wash water

Cold
Main wash
water
 Touch the
cold
machine is only connected to a cold
water supply, or touch
washing machine is connected to
cold and hot water.
Further information will appear on the
display.
22
Hot
sensor if the washing
hot if the
Hot
sensor if the washing
if the
hot
Removing the transit bars
The display will remind you to remove
the transit bars.

Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing ma-
chine and to adjacent furniture or ap-
pliances.
Remove the transit bars as described
in "Installation and connection".
 Confirm that the transit bars have
been removed with the OK sensor.
Continue setting up as described in the Op-
erating Instructions
play.
 Confirm the message with the
OK sensor.
appears in the dis-