Time And Date Configuration; Password - Hitachi EC702HP Operation Manual

Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
5.5.7
To program the date and time, use keys  or  . To change between the parameters, press the
 and .
5.5.8
Once a password is composed (by four numbers) it will become the set password for the
equipment. Please be certain to capture and store your password in a safe place.
To access the password configuration screen, the operator must follow the sequences below,
starting from the Setup Menu [1000].
To enable the password or set a new one, select Enable / Choose new password.
To set the password, use the keys  and  keys to move the arrow head under each one of the
4 password positions. The  and  keys increase or decrease the numerical value of the each
position. Select the password and press ENTER.
Manual Rev. 0.0 - August 2016

Time and date configuration

> >
Select Time and Date Setup and press ENTER.
Press key ESC to return to Setup Menu.

Password

>
>
Select Password Setup and press Enter.
5-21