Restoring The Factory Settings; Adjusting The Grinding Degree - Tchibo Esperto Caffe Original Instructions For Use And Warranty

The setting is saved and two beeps will sound as confirmation.
If the settings are not to your taste, simply repeat the procedure to change
them again.

Restoring the factory settings

You can restore the original settings for the water quantity.
The factory settings for the water quantity have been restored.
3. As soon as the coffee starts
being dispensed, press and
hold the coffee button.
4. Release the button as soon
as the desired quantity has
been dispensed into the cup.
1. Press the On/Off button to switch
on the machine.
2. Wait until the machine heats
up and all buttons light up
continuously.
3. Press and hold the On/Off button
+
and the "Intense " button for
approx. 5 seconds until you
hear 2 beeps.
4. Release the buttons.

Adjusting the grinding degree

CAUTION – material damage
• Grinder settings may only be adjusted while the grinder is operating.
• Adjust the grind settings in small increments, and observe the changes after
1 - 2 cups of coffee, before adjusting the coarseness of the grinder.
15
1. Press the On/Off button to switch
on the machine.
2. Wait until the machine heats
up and all buttons light up
permanently.
3. Place an empty cup under
the coffee spout.
4. Remove the lid from the coffee
bean compartment.
The grind adjuster is located in
the coffee bean compartment.
It has been preset to level 2 as
default.