Pulse To Tone Conversion - NEC SL1000 Features And Specifications Manual

SL1000/SL1100
Description
An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user
change their extension dialing mode while placing a call. For systems in a Dial Pulse area, this permits
users to access dial-up OCCs (Other Common Carriers) from their DP area. The user can, for
example:
• Place a call to an OCC over a DP trunk.
• Depending on programming:
P
Manually implement Pulse to Tone Conversion
- OR -
Wait 10 seconds.
• Dial the OCC security code and desired number. The system dials the digits after the conversion as
DTMF.
Conditions
Pulse to Tone Conversion is valid only for Dial Pulse trunks (PRG 14-02-01, options 0 or 1).
Default Settings
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
408M-A1 (SL1000)
408E-A1 (SL1000)
COIDB-B1 (SL1100)
Related Features
Central Office Calls, Placing
Multiple Trunk Types
1-576

Pulse to Tone Conversion

ISSUE 2.0
Pulse to Tone Conversion