NEC SL1000 Features And Specifications Manual page 354

SL1000/SL1100
Multiline Terminal
1. Press your Voice Mail key (PRG 15-07 or SC 851 : 01 +
- OR -
Press the Vmsg softkey. (SL1100)
Your mailbox number is normally the same as your extension number. You may optionally dial a co-
worker's mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
- OR -
Press Speaker key and dial
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
I Normally, your Message Waiting (MW) LED goes out (if applicable). If it continues to flash, you have
unanswered Message Waiting requests or a new General Message. See "To check your messages"
below.
Single Line Terminal
1. Lift the handset and dial
If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox
number instead. You can also use this procedure from your own telephone to call a co-worker's
mailbox.
2. If requested by Voice Mail, enter your security code.
Checking Messages
1. Press the Voice Mail key once.
The voice mail is called.
When there are new messages, the Message Waiting LED on the telephone flashes red.
With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail
or transfer call a to voice mail (Hold + MSG + Extension Number), etc.].
Leaving A Message (Multiline Terminal Only)
To leave a message in the mailbox of an unanswered extension (the extension you call can be
busy, in DND or unanswered):
1. Press the Voice Mail key (PRG 15-07 or SC 851: code 77 + InMail pilot).
- OR -
Dial * 8.
The Voice Mail System prompts you to leave a message.
Forwarding Calls to Your Mailbox
To activate or cancel Call Forwarding:
1-344
* 8.
* 8.
* 8).
ISSUE 2.0
InMail