NEC SL1000 Features And Specifications Manual page 629

ISSUE 2.0
4. Dial external paging group number, "1".
5. Dial VRS message number for warning, "001".
6. After beep tone, record the message.
7. Press Speaker key and finish recording.
Set up Auto Dial Setting for Security Sensor
1. Press Speaker key + dial 717 at Multiline Terminal.
2. Dial Security sensor number (1-6), "1".
3. Dial Speed dial bin number to use, "999".
4. Dial emergency call destination number "xxx-xxx" and press Hold key.
5. Dial monitored terminal number, "200".
6. Dial VRS message number for destination answer, "002".
7. After beep tone, record the message.
8. Press Speaker key and finish recording.
To start Security Sensor operation
1. Press Speaker key + dial 819 + 1 at terminal, and sensor is valid after the timer (PRG 20-55-01)
passes. (V1.5 or higher)
- OR -
2. Press the Function key (
The key lights after the timer (PRG 20-55-01) passes, and sensor is valid.
- OR -
3. Security Sensor time pattern 1 comes time to start.
To stop Security Sensor operation
1. Press Speaker key + dial 819 + 0 at terminal.
- OR -
2. Press the red lit Function key (
- OR -
3. Security Sensor time pattern 1 comes time to stop.
When detect Security Sensor On
1. Warning message send to internal page group1 and external page group 1.
2. Place outgoing call automatically according to speed dial bin 999.
3. When destination answered send VRS message 2.
4. After finishing VRS message 2, destination person can monitor through extension 200. By dialing
* from outside it is possible to make both way talk.
When send Warning message
When send Warning message, but does not place emergency call case:
PRG 20-46-05 is set table number, which has no setting.
When place emergency call
When place emergency call, but does not send Warning message case:
PRG 20-46-02 to PRG 20-46-03 should be set to "0".
Features and Specifications Manual
* 33) at Multiline Terminal and Function key blinks. (V1.5 or higher)
* 33) at Multiline Terminal and the Function key turn off.
SL1000/SL1100
S
1-619