N) Operation Via Communication And Its Settings; Initial Setting Of Operation Via Communication - Mitsubishi Electric 800 Series Function Manual

(N) Operation via communication and its settings

2.3
(N) Operation via communication and its
settings
Purpose
To start operation via
communication
To start operation via
CC-Link IE TSN
2.3.1

Initial setting of operation via communication

Set the action at fault occurrence or at writing of parameters when the inverter is performing operation via
communication.
Pr. Name
342 Communication EEPROM
N001 write selection
Communication reset
selection/Ready bit status
349 selection/Reset selection
when inverter errors
cleared
Communication reset
N010
selection
N240 Ready bit status selection
Reset selection when
N241
inverter errors cleared
14
PARAMETER
Initial setting of operation
via communication
Initial setting of CC-Link IE
TSN communication
CC-Link IE TSN
communication function
Initial Setting
value range
Parameter values are written to the EEPROM and RAM by
0
communication.
0
1 Parameter values are written to the RAM only by communication.
0 Enables the error reset function in any operation mode.
1 Enables the error reset function only in the Network operation mode.
100, 101 The status of Ready bit in communication data can be selected.

0
When the communication option is specified for the command
1000, 1001,
source in Network operation mode, it is possible to select whether
1100, 1101

the inverter is reset after the "Fault reset" command is executed.
0 Enables the error reset function in any operation mode.
0
1 Enables the error reset function only in the Network operation mode.
0
0 The status of Ready bit in communication data can be selected.
1

When the communication option is specified for the command
0
0 source in Network operation mode, it is possible to select whether
1

the inverter is reset after the "Fault reset" command is executed.
Parameter to set
P.N001, P.N010,
Pr.342, Pr.349,
P.N013, P.N014,
Pr.502, Pr.779
P.N240, P.N241
P.N700 to P.N703,
Pr.434 to Pr.441,
P.N710 to P.N713,
Pr.1130, Pr.1442 to
P.N741, P.N760 to
Pr.1448
P.N766
P.N100, P.D400, Pr.541, Pr.804,
P.H700, P.N746 Pr.810, Pr.1459
Description
Refer
to
page
14
20
24