Rssi - Huawei Atool User Manual

HUAWEI Module Atool User Guide
This command can be executed only in the CDMA module. You must specify either the ESN or
MEID for CDMA modules.

5.6 rssi

Command
syntax:
Command
function:
Parameter
description:
Issue 02 (2015-01-31)
atool rssi <-m mode> <-f frequency> [-g gain] [-pt primary
target] [-at aux target] [-w window] [-rt overtime] [-tt test times]
[-div]
Tests the RSSI value and checks whether the antenna is properly
installed.
 -m: This parameter sets the band to be tested by the Atool. Table
5-1 lists the recommended frequency settings. For other
frequency setting details, see 3GPP specifications.
 -f: This parameter sets the reference frequency (unit: MHz). See
Table 5-1 for details.
-g: This parameter sets the Low-Noise Amplifier (LNA) level for

the product. The default value is 1. The detailed parameter
configuration is shown in Table 5-2 . The recommended test
power range is from –70 dBm to –20 dBm. If the power is out of
this range, the Atool detects no power.
-pt: This parameter sets the target value for the main RSSI test

(unit: dBm). This parameter must work with parameter -w. If -pt is
not configured, the Atool does not check the target value. (default
value: null)
-at: This parameter sets the target value for the diversity RSSI

test (unit: dBm). This parameter must work with parameter -w. If -
at is not configured, the Atool does not check the target value.
(default value: null)
 -w: This parameter sets the limit test of RSSI (unit: dB). This
parameter must work with parameter -pt and -at. If -pt and -at are
not configured, the Atool does not check the target value. (default
value: null)
 -div: This parameter sets the test for antenna diversity. If -div is
not added in the command, the Atool does not take the test for
antenna diversity.
-rt: This parameter sets the timeout duration for RSSI value

reading and must be a positive integer. The unit is s. (default
value: 5)
-tt: This parameter sets the number of times for RSSI value

reading and is used for figuring out the average RSSI value.
(default value: 1)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Console Commands and Parameters
12