Hydrostatic Drive Belt; Removal - Toro TIMECUTTER HD 75201 Service Manual

Hydrostatic Drive Belt

Removal

1. Park the machine on a level surface and disengage the PTO. Stop the engine, wait for all moving parts to stop,
and remove key. Engage the parking brake.
2. Raise and support the unit so that the drive wheels are off the ground.
3. Remove the mower belt from the clutch,
4. Using a spring removal tool (Toro Part No. 92-5771), remove the drive idler spring from the slot in the frame.
Remove the spring from the drive idler arm and inspect for damage or wear (Figure 7).
5. Remove the clutch stop.
HYDROSTATIC DRIVE SYSTEM
see "Mower Belt Replacement," chapter 3, page 3-15.
Digital Edition - TIMECUTTER® HD Service Manual
April 2017
Figure 7
7-9
Table of Contents