Toshiba Tecra M2V Series User Manual page 70

70
Connecting Other External Devices
Adding memory
13 Turn the computer over and restart it.
When you turn on the computer, it automatically recognizes
the additional memory.
Removing a memory module from the secondary
slot
If you need to remove a secondary memory module:
1 Complete steps 1–7 in
the secondary
remove the memory module cover.
2 Pull the clips away from the memory module.
The memory module pops up partially.
3 Carefully remove the module from the slot.
slot" to shut down the computer and
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the device.
Do not remove the memory module while the computer is in
Standby mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the
above cases, the Standby configuration will not be saved.
The following message appears when you turn on the power:
Warning: Resume Failure
Press Any Key To Continue
If the computer hangs up when you turn it on, perform the
following: Press the power button and hold it down for five
seconds, then turn the power on again.
"Installing a memory module in