Toshiba Tecra M2V Series User Manual page 163

When the computer restarts, it remembers the last
NOTE
configuration. If data does not appear on the display you are
using after starting in Standby Mode, press Fn + F5.
CPU—Allows you to enable or disable CPU frequency
switching modes.
Dynamically Switchable—This mode is the default
setting for your computer, and automatically changes the
processing frequency and decreases voltage depending
on the power source:
AC Power—If your computer is connected to the
AC adapter, the CPU frequency mode is set to high
for faster processing.
Battery Power—If your computer is running on
battery power, the CPU frequency mode is set to
low, for slower processing. Switching the CPU to
low allows you to conserve power and extend the
operating time of your battery.
Always High—Sets the CPU speed to high when using
either the battery or the AC adapter.
Always Low—Sets the CPU speed to low when using
either the battery or the AC adapter.
Boot Priority—Allows you to change the sequence in
which your computer searches the various drives for the
operating system
Keyboard—Allows you to enable/disable the Wake-on-
Keyboard function
USB—Allows you to enable or disable USB Legacy
Emulation
LAN—Allows you to set networking functions
By changing any of the options that appear in the dialog
boxes and clicking Apply, you can reconfigure that function.
Toshiba Utilities
TOSHIBA HW Setup
163