Using Turn Off Or Shut Down - Toshiba Tecra M2V Series User Manual

Using Turn Off or Shut down

The Turn Off or Shut down command shuts the computer
down completely. Use the Turn Off command if you are using
the Windows XP Professional operating system when not
connected to a domain server.
Use the Shut down command if you are using the Windows
XP Professional operating system and are connected to a
domain server.
When you start up again, the computer runs a self-test and
loads the operating system. You must open any programs and
files you want to use.
Factors to consider when choosing Turn Off or Shut down:
No power is used while the computer is shut down. This
is the most efficient mode if you will be away from your
computer for an extended time.
Restarting from Turn Off or Shut down uses the most
time and battery power.
When starting up again, the system does not
automatically open the programs and files you were
using.
For the Windows XP Professional operating system, follow
these steps to shut down the computer:
1 Click the Start button, and then Shut down.
The Shut Down Windows dialog box appears.
TECHNICAL NOTES: Before using any of these options to
power down your computer, save your files and make sure the
disk activity lights are off.
If you change your mind and decide to continue working after
all, wait a few seconds before turning the computer on again.
Learning the Basics
Powering down the computer
113