Adding Memory; Installing Memory Modules - Toshiba Tecra M2V Series User Manual

66
Connecting Other External Devices

Adding memory

Adding memory
Your notebook computer is equipped with two memory slots
which can provide various memory configurations. When
additional memory is added, or original memory replaced, it
is recommended that you use only compatible memory. In the
event original memory is replaced with invalid memory, the
system will beep and will not boot beyond the BIOS memory
check. A message may display. If this occurs, contact
Toshiba's support center at (800) 457-7777.

Installing memory modules

Additional memory modules can be installed in your
computer. There are two memory expansion slots; the
secondary slot located on the bottom of your computer, and
the primary slot located under your computer's keyboard.
Normally, you will install or replace a memory module in the
secondary slot—the secondary slot is designed for quick
installation.
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or visit
accessories.toshiba.com
To avoid damaging the computer's screws, use a standard
Phillips no.0 screwdriver (for primary memory installation) or
Phillips no.1 screwdriver (for secondary memory installation)
that is in good condition.
.