Pair To A Bg Meter - OmniPod DASH User Manual

Pair to a BG meter

If desired, you can pair your PDM to a CONTOUR® NEXT ONE BG meter (BG
meter). Once paired, blood glucose readings can be transmitted via Bluetooth®
wireless technology from your BG meter to your PDM.
Note: If you do not want to pair to a
BG meter, tap SKIP. Then go to "Bolus
Calculator Settings" on page 32
To pair a BG meter:
1. Turn off your BG meter, and place it
within six feet of your PDM.
2. Turn on the blue light on your BG
meter. To do so, press and hold the OK
button on the BG meter until its white
light changes to a flashing blue light.
3. On the PDM, tap START SEARCH.
The PDM displays the model and
serial number of any CONTOUR®
NEXT ONE BG meters that are in
range and available for pairing.
4. Turn your BG meter over to find its
seven digit serial number. Verify that
this number matches the one on the
PDM screen.
5. On the PDM, tap PAIR below your BG
meter's serial number.
A Successfully Paired message
appears.
Note: If the BG meter is paired to
another PDM, see "Pairing, unpairing,
or renaming a BG meter" on page
114.
6. Tap OK. Verify that your BG meter is
listed as paired.
Initial PDM Setup 2
31