Related Manuals for Toro 22438
Summary of Contents for Toro 22438
- Page 1 Form No. 3396-719 Rev A Tree Forks Compact Utility Loaders Model No. 22438—Serial No. 240000001 and Up *3396-719* A Register at www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
Introduction This manual also uses 2 words to highlight information. These tree forks are intended to be used on a Toro compact Important calls attention to special mechanical information utility loader. They are designed to help you plant trees and... -
Page 3: Safety
To ensure optimum performance and continued safety certification of the machine, use only genuine Toro WARNING replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be dangerous, If you do not fully seat the attachment locking and such use could void the product warranty. -
Page 4: Stability Ratings
Stability Ratings Safety and Instructional Decals To determine the degree of slope you can traverse with the attachment installed on a traction unit, find the stability rating Safety decals and instructions are easily for the hill position you want to travel in the appropriate table visible to the operator and are located near below, then find the degree of slope for the same rating and any area of potential danger. -
Page 5: Product Overview
Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a list of all approved attachments and accessories. To best protect your investment and maintain optimal performance of your Toro equipment, count on Toro genuine parts. -
Page 6: Operation
Operation Refer to your traction unit Operator’s Manual for more information on installing and removing attachments on your traction unit. Important: Always use the traction unit to lift and move the attachment. Using the Tree Forks Note: The tree fork is an excellent tool for transporting balled and container grown trees and shrubs. -
Page 7: Maintenance
Maintenance Recommended Maintenance Schedule(s) Maintenance Service Maintenance Procedure Interval • Grease the bearings. Before each use or daily • Check the hydraulic hoses. Every 100 hours • Grease the bearings. • Check the hydraulic hoses. Before storage • Paint chipped surfaces. •... -
Page 8: Storage
Storage CAUTION Hydraulic fluid escaping under pressure can 1. Before long term storage, wash the attachment with penetrate skin and cause injury. Fluid injected into mild detergent and water to remove dirt and grime. the skin must be surgically removed within a few 2. -
Page 9: Troubleshooting
Troubleshooting Problem Possible Cause Corrective Action Fork does not open and close. 1. A hydraulic coupler is not completely 1. Check and tighten all couplers. connected. 2. A hydraulic coupler is damaged or 2. Check the couplers and replace any contaminated. - Page 10 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant Directives.
- Page 11 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.
- Page 12 Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company. Australian Consumer Law: Australian customers will find details relating to the Australian Consumer Law either inside the box or at your local Toro Dealer.