Related Manuals for Toro Sitework 22438
Summary of Contents for Toro Sitework 22438
- Page 1 Form No. 3323-274 Tree Forks Sitework Systems Attachment Model No. 22438—890001 & Up Operator’s Manual English (CE)
-
Page 2: Table Of Contents
DANGER, WARNING and CAUTION are signal words used to identify the level of hazard. However, regardless of the hazard, be extremely careful. The Toro Company – 1999 8111 Lyndale Ave. South All Rights Reserved Printed in the USA Bloomington, MN 55420–1196... -
Page 3: Safety Decals
DANGER CAUTION POTENTIAL HAZARD POTENTIAL HAZARD There may be overhead power lines in the work If you step off of the platform with the load area. raised, the machine could tip forward. WHAT CAN HAPPEN WHAT CAN HAPPEN Shock may occur if a power line is touched by a Someone nearby may be pinned or injured. -
Page 4: Specifications
Specifications WARNING Note: Specifications and design are subject to change POTENTIAL HAZARD without notice. Exceeding the maximum recommended slope can cause the traction unit to tip. Overall width 24.5 inches (62 cm) WHAT CAN HAPPEN Overall length 45 inches (114 cm) If the traction unit tips, you or bystanders could be crushed. -
Page 5: Operation
Operation Never attempt to lift more that the rated capacity of the traction unit. When transporting a load, keep the fork as close to the Note: Refer to your traction unit operator’s manual for ground as possible. complete instructions on installing/removing attachments onto/from the traction unit and connecting/disconnecting To ease the placement of a tree into a hole, pick up the hydraulic hoses. -
Page 6: Storage
Storage 3. Ensure that all hydraulic couplers are connected together to prevent contamination of the hydraulic system. 1. Before long term storage, wash the attachment with mild detergent and water to remove dirt and grime. 4. Paint all scratched or bare metal surfaces. Paint is available from your Authorized Service Dealer.