Epson LightScene EV-110 User Manual page 58

4. Select the Notifications menu and press
5. Turn on the SNMP setting.
6. Enter up to two IP addresses to receive SNMP notifications as the Trap IP Address settings, using
0 to 255 for each address field.
Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a
number from 0 to 255).
7. Enter the SNMP Community Name up to 32 alphanumeric characters long.
Enter.
58